Welcome to Fabnos. Shop for the best Dental Materials & Equipment Shipped Worldwide.

Zinc-Phosphate Cement

CHARACTERISTICS

This product can be used in bases and lining of cavity. This is a fine grain material, which provides excellent compressive strength.

Packaging

Powder:30g
Liquid:15ml

Category:
Add to Wishlist
Add to Wishlist
Share this product

Description

Zinc Phosphate Cement

CHARACTERISTICS

This product can be used in bases and lining of cavity. This is a fine grain material, which provides
excellent compressive strength.

USAGE

Mainly used in bases and lining of cavity.

Packaging

Powder:30g
Liquid:15ml

PRODUCT COMPOSITION:

Powder:Zinc oxide, Magnesium oxide 
Liquid:Phosphoric acid,Aluminum, Zinc oxide 

PROCEDURE
 Mixing it on the glass plate with an agate or plastic spatula.
 Environment of mixing: using it at the temperature of 231℃ and at the relative humidity of
50+10% recommended. If using it at higher temperature, its curing procedure will be fastened
and its working time will be decreased. If using it at warmer area, please use a cooler glass
plate.
 The proportion of powder to liquid is 1.5g : o.5 ml(0.85g).
 The proportion of powder to liquid for test is 1.5g : o.5 ml(0.85g). Test at the temperature of
231℃ and at the relative humidity of 5010% in accordance with ISO9917-1:2007.
 Operation procedure:
When mixing, first divide the weighed powder into three heaps (i.e. big, middle, small), then
put the first heap of powder into proportional liquid and mix it evenly for about 10 seconds,
put the second heap of powder into proportional liquid and mix it evenly for about 15 seconds
and put the last heap of powder into proportional liquid and mix it thoroughly.
 Mixing time: accomplish the whole mixing procedure within 60 seconds.
 Working time: the whole material mixing procedure should accomplish in 90 seconds
 In a case of deep pulp: cover the dentine most close to the pulp with eugenol cement so as to
avoid acid irritation to the pulp.
 Post treatment: after the filling process, remove the excess material by using a wet cotton and
trim it after 24h when its curing.
 The product can be stored in a dry place of 10 ~ 23℃for best performance.

MAIN TECHNICAL DATA
 Net setting time: 2~6 min;

 Compressive strength (24h after mixing): ≥50Mpa
 Acid-erosion:≤0.3 mm
PACKAGE
 Each box containing 3 bottles of powder, 30g net, and 3 bottles of liquid, 15ml net
 Each box containing 6 bottles of powder, 30g net
 Each box containing 6 bottles of liquid, 15ml net
 Its color is yellow-pale after mixing.

STORAGE
Store in a dark and dry place. Expose to high temperature and humidity in long time will shorten the life usage of product and affects the performance.

SHELF-LIFE
Two years

CAUTIONS
 Dont use metallic spatula or else it would make the cement color-changed.
 It would be impact properties if mixing the material on paper. Please mix on the glass plate.
 In order to avoid the influence on its properties, please wring the lid of bottle tightly at once after
using it.

WARNING
 Prevent it splashed into your eye: if splashed into your eye, rinse your eye with plenty of clean water at once, and then see the doctor.
 Put it in a dry place and keep away from children.

Made in China