Description

Attaque f (Hydrofluoric Acid 10%)

Condicionador de porcelana

CONTENTS:

1×2,5g syringes de ATTAQUE F; 3 application tips.

Reg. ANVISA: 10298550115

 INDICATION:

The ATTAQUE F is used to dentals porcelain conditioning, such as: facets, inlays/onlays; providing a bigger resistance of interface union resinous porcelain/cement or porcelain/composite.

 COMPOSITION:

Hydrofluoric acid, thickener, preservative and deionized water.

 TECHNICAL INFORMATIONS:

ATTAQUE F when applied in porcelain promotes a deep and extensive penetration pattern of the surface, making it micro retentive, providing a better adhesion with resinous materials, such as adhesives and cements, favoring the retention and propitiate resistance to the restoration.

 USE INSTRUCTIONS:

The time for application of ATTAQUE F differs according to the material classification;

– FELDSPATHIC PORCELAINS: condition for 1 to 2 minutes;

– CERAMIZED GLASS: MACHINED – condition for 1 minute; PRESSED/INJECTED – condition for 30 seconds.

TO INDIRECTS CEMENTENTION OF RESTORATIONS OR FACET WITH RESINOUS CEMENTS:

1- Realize the preparation of dental surface according to technical indicated by

luting agent;

2- Realize etching agent using ATTAQUE F all over internal surface of the restoration or facet by the recommended time according to material classification;

3- Wash and dry carefully;

4- Apply Silane aided by a brush in the conditioned surface, wait for 1 minute and apply new layer;

5- Realize the resinous cement application (for example MASTER CEMENT DUAL),

according to product specifications.

FOR REPAIR CERAMICS WITH COMPOSITES:

1. Remove friable borders and make the surface rough with diamonded tips;
2. Realize conditioning in the surface with ATTAQUE F by the recommended time in according to the material classification;
3. Rinse thoroughly with water and dry completely;
4. Apply Silane aided by a brush all over the conditioned surface, wait for 1 minute and apply new layer;
5. Apply the conventional adhesive system selected ( for example Master Bond or Master Bond Multi – Use), and proceed the light curing as manufacture instructions;

6. Promotes the repair with a composite (for example Master Fill), adapting it to fringes and avoiding overcontour.

TO CERAMIC REPAIRS / CERAMIC:

1. Realize conditioning in the surface with ATTAQUE F by the time recommended in according to material classification;

2. Wash and dry completely.
3. Apply SILANE in the conditioned surfaces, wait for 1 minute and apply new layer;
4. Apply the conventional adhesive system selected (for example Master Bond or

Master Bond Multi-Use), and proceed the light curing as manufacture instructions;

5. Join parties keeping them in position with slight pressure and light cure as manufacture instructions;

6. If exists lack of ceramic, rebuild the fractured area with composite ( for example Master Fill)

 SPACIAL CARE:

It is recommend to realize all the procedure with absolute isolation and with disposables gloves. In case of contact with eyes and skin, wash immediately with running water. If the

irritation persists, look for a doctor. Realize the product disposal according to local legislation, assuring its complete distortion to prevent its reutilization and environmental damages.

CONTRAINDICATION:

ATTAQUE F Should not be used in patients in unown to have sensibility to any of the ingredients listed.

 WARNINGS:

Do not use material after expiry date. The manufacturer is not liable for damages caused by improper use or

use not provided at these instructions. “KEEP MATERIAL OUT OF THE REACH OF CHILDREN”.

FOR USE IN DENTISTRY ONLY